Advanced Sealed Technology Solvent Systems
These machines are manufactured by one of Europe’s largest equipment manufacturers and with over 22 years of precision component cleaning experience fully understand the challenges of modern precision component cleaning tasks.Capable of using any non flammable solvent chemistry, they offer very fast process times.
Consumption is normally well below the SED thresholds although fully closed loop versions including carbon Absorption de-adsorption packages are also available. Fasts process Times from 2 minutes to usually a maximum of 10 minutes for very Complex components are standard. Ideally suited to the high quality demands of the electronics, Optical, medical and aviation industries, as well as others, the range offers flexibility, safety and compliancy In a commercially viable way.
Click thumbnail for larger image
Single or multi sump versions of this fully automated machine are available With load and off load tables in the same area, it is designed for general component cleaning to minimize manual intervention, thereby speeding up production times for fast throughput applications.
Many versions of this type of machine are available for a multitude of applications. Totally focused on high volume applications where time and cleanliness are vital and where down time must be kept to a low level.
A low level loading access point with semi automated process chamber makes this machine ideal for larger basket sizes. This process eliminates the need to continually go up and down stairs to complete a cleaning cycle.
This design will eliminate the manual handling aspect of the process making it a safer machine for the operator to use. A variety of sizes are available which can be built and designed to your exact specification.
This multistage machine gives a very high level of cleanliness where cleaning is critical to your process. It is designed for more precision cleaning and is ideal for larger items that need to be cleaned to very high specification as in the optical and or medical industries.
Very fast process times and advanced filtration ensure maximum cleanliness in the shortest process time.
This is a twin sump fully automated machine, with load off load sections to ensure continuous flow of baskets. This model is designed for heavy contamination problems like lapping pastes, buffing compounds, heavy greases, waxes, etc. It has a built in distillation system to deal with the high solids/oil content and a particulate counter to ensure the baskets only move when the contamination is at the pre agreed level.
Ensuring consistent quality at all times this is the most advanced equipment of its type available today.
This is a twin sump semi automated front loading machine.
Designed for the electronics and optical industries where precision
component cleaning is an absolute requirement on a continuous basis.
Modern filtration systems ensure particulates are easily removed and with integrated controls quality again is never an issue. Capable of using modern fluorinated chemistry as well as other non flammable solvents, it is a very versatile and flexible machine.
Other Options
- Rotational baskets – for small complex components
- Tilt mechanisms – for cupped parts
- Manifolds units – for more complex pipes or long bore drilled holes
- Distillation units – for heavy duty oils and particulate contamination
- Filtration systems - dedicated to the particulate requirements in medical/optical industries specifically
- Carbon packages – consumable or absorption/de-adsorption
- Special handling devices – bespoke design for those more difficult applications or components
- Full range of bespoke equipment – designed specifically for your needs
- Wide range of standard machines – for faster build times
- Dedicated service support team
- Free site surveys to identify your best option
- Full range of chlorinated, brominated and fluorinated solvents
- Flammable hydrocarbon systems available
- Solvent reduction scheme as standard